LifeBox – Design of an organ transport container for extending preservation times for transplant, specifically adapted for drone flight

Title: LifeBox – Design of an organ transport container for extending preservation times for transplant, specifically adapted for drone flight.

(https://timesofindia.indiatimes.com/home/science/iisc-lifebox-to-aid-organ-transfer-by-drones/articleshow/64450470.cms)

Lab/Affiliation: CPDM, Indian Institute of Science, Bangalore

Salary: As per IISc. norms (22-24k PM for Project Assistant; 30-33k PM for Project Associate)

Essential Qualifications: B.Tech/M.Tech in ECE/EEE/Instrumentation with sound knowledge in Embedded Systems, Circuit Design, Control System Design, Board Bring-up

Desirable Skills: Knowledge about quality systems for medical devices and EMC standards, good documentation skills, must be a team player (the nature of work

demands coordination with several people involved in the project).

Task:

The selected staff is expected to

1. Integrate multiple sensors and actuators with microcontrollers

2. Design and test a control system using sensor feedback

3. Develop a graphical user interface for the system

4. Design and develop a PCB enclosing all electronic components involved

Commitment Required: 6 months – 1 year, starting as soon as possible.

Interested candidates satisfying the above requirement can email their resume to Prof. B. Gurumoorthy (bgm@iisc.ac.in ), Prof. Ashitava Ghoshal

(asitava@iisc.ac.in) with a CC to devalkaria@iisc.ac.in

Comments

Statistics in Flow Cytometry Data and "MFI" values

The speed of the flow cytometry offers wide range of data points and data plots. Due to its sensitivity and versatility, it has been used extensively. Flow cytometer can detect up to 1000s of cells per second.. But, it should be noted that the flow cytometry also involves the statistics, its significance, calculating the fluorescence intensity.. Statistics in flow cytometry involves, total number of data points acquired, percentage population, most importantly mean and median fluorescence intensity, and others. Most of us get confused about the term "MFI", whether it means mean fluorescence intensity or median fluorescence intensity.. Truth is, both.. It means it can be described as either mean or median fluorescence intensity. Some researchers use Mean for MFI and some use Median for MFI values. (Keep...

Protocol: Sample preparation for Cell Cycle Analysis by Flow Cytometry

Protocol: Preparation of Samples for Cell Cycle Analysis by Flow Cytometry: 1) Suspend approximately million cells (10^6) in 1mL of phosphate-buffered saline solution (1x). And with the help of pipette, gently aspirate about 7-8 times, to make the single cell suspension. 2) Take a centrifuge tube and add 4mL of 70% ethanol. (70% ethanol should be one ice before using). and add 1mL of cells in PBS to this tube. Keep the tubes on ice for minimum 2 hours at 4℃.. This step will fix the cells. ( cells can kept at 4 ℃ for a week). 3) Centrifuge the ethanol fixed cells for 5 minutes at 300g. Carefully take out the supernatant. Do not disturb the pellet. 4) Add 5mL of cold 1x PBS to this pellet and suspend the cells using pipette. 5) Centrifuge the tubes at 300g for 5 minutes. and discard the supernatant. Again do not disturb the pellet. 6) if required, step 5 can be repeated for one more time. 7) Add 1mL of Propidium Iodide (PI...

Incubators

In biological sciences or bio medical sciences, the incubators are the devices which are used to maintain or grow microorganisms or cell cultures. Main task of an incubator is to maintain the optimal temperature, humidity, carbon monoxide, or CO2 and O2 content. Integrated Scientific Solutions Incubators are regularly, in fact daily are used in clinical or research areas such microbiology, molecular biology, cell biology, etc. Commonly they are used to culture or grow bacteria as well as eukaryotic cells. Incubators are insulated boxes in which the required temperature can be adjusted depending on the cells or bacteria to be grown or cultured. The temperature can be up to 65℃ to 70 ℃.. Most commonly used incubators are 37 ℃ and 30 ℃ incubators. 37 ℃ are used for growing bacteria such as E.coli bacteria. and 30 ℃ are commonly used for growing yeast cells. There are special incubators which maintain the humidity...

BIOMAG

Search This Blog